About FlightSafety International FlightSafety International is the world's premier professional aviation training company and supplier of flight simulators, visual systems and displays to commercial, government and military organizations. The company provides training for pilots, technicians and other aviation professionals from 167 countries and independent territories. FlightSafety operates the world's largest fleet of advanced full-flight simulators and award-winning maintenance training at Learning Centers and training locations in the United States, Canada, France and the United Kingdom. Purpose of Position Provides software solution for visual systems integration and simulation of systems external to the aircraft for use in pilot training. Must simulate or stimulate avionics, infrastructure, and aircraft environment, including providing the interface to the visual system. Is responsible for product from design phase to hardware integration phase, to customer and certification authority verification, and continuing with ongoing customer support. Tasks and Responsibilities <ul> <li>Will work on a variety of devices, from Full Flight Simulators with six degree-of-freedom motions systems and wraparound visual systems to graphics-based desktop trainers.</li> <li>Implements all standard visual systems simulation software, datalink simulation software, and other simulated systems external to the aircraft (such as moving models, satellites, nav aids and radios, DMO/SAF servers, and electronic warfare systems), and integrates the software with that of other engineering disciplines (such as aircraft systems, flight, propulsion, autoflight systems, sound, instructor station, and image generators).</li> <li>If aircraft data is not available is required to assist in gathering data from aircraft or test bench to be used to re-engineer, the aircraft avionics.</li> <li>Develops graphical representations of aircraft instruments and displays for lower level (desktop) trainers and re-engineered avionics in high-level trainers.</li> <li>Prepares customer test guides that will be used to verify that the simulation satisfies the simulator specification requirements.</li> <li>Studies aircraft data (wiring diagrams, avionic specifications, etc.) to design real time software to accurately model the avionic's behavior.</li> <li>Performs standardized procedures to verify that the design meets the requirements of the customer test guide.</li> <li>Presents and demonstrates the simulator operation to the customer and corrects deficiencies identified by the customer. This may include working at customer facilities. Exhibits and practices professional and courteous behavior while interacting with customers.</li> <li>Works well with software and hardware engineers, technicians, project engineers and program managers. Interacts within a cooperative environment through beneficial behavior, commitment to common goals, contribution to problem solving, communication of ideas and suggestions, and encouragement.</li> <li>Updates and maintains project schedules in Project Server for assigned projects.</li></ul> Tasks and Responsibilities <ul> <li>Domestic and international travel, shift work, and special work hours may be required to accomplish duties.</li> <li>Exhibit and practice professional and courteous behavior while interacting with both internal and external customers.</li> <li>Interact within a cooperative environment through beneficial behavior, commitment to common goals, contribution to problem solving, communication of ideas and suggestions, and encouragement to other employees and departments.</li> <li>Accountable for the control and distribution of documents and/or equipment subject to export control restrictions and the security of FSI materials, projects, intellectual property, and business information regarding the methods and techniques used in the production and usage of FSI products.</li> <li>Accountable for the accuracy and completeness of assigned tasks.</li> <li>Able to adhere to a work schedule including prompt and regular attendance.</li> <li>Ability to work in a constant state of alertness and safe manner.</li></ul> Level Dependent <ul> <li>Will train other engineers as required. Makes self available to answer questions pertaining to his/her expertise.</li> <li>May be expected to independently maintain schedule and complete tasks.</li> <li>May contribute or lead new research and product development.</li> <li>May lead small teams of engineers.</li> <li>May be involved in creating customer proposals including an estimate of hours required.</li> <li>May be required to give technical presentations.</li></ul> Minimum Education <ul> <li>Level I - Bachelor's degree in Engineering; or equivalent combination of education and experience. C++ competency desired. Level II - Bachelor's degree in Engineering; and two years related experience preferably in simulation; or equivalent combination of education and experience. Knowledge and expertise for this level usually results from internal progressive experience. However, selection for this position is based on the demonstrated ability of the person to successfully fulfill the requirements listed. C++ competency desired. Level III - Bachelor's degree in Engineering; and four years related experience preferably in simulation; or equivalent combination of education and experience. Knowledge and expertise for this level usually results from internal progressive experience. However, selection for this position is based on the demonstrated ability of the person to successfully fulfill the requirements listed. C++ competency required. Level IV - Bachelor's degree in Engineering; and six years related experience preferably in simulation; or equivalent combination of education and experience. Knowledge and expertise for this level usually results from internal progressive experience. However, selection for this position is based on the demonstrated ability of the person to successfully fulfill the requirements listed. C++ competency required. Level V - Bachelor's degree in Engineering; and ten years related experience preferably in simulation; or equivalent combination of education and experience. Knowledge and expertise for this level usually results from internal progressive experience. However, selection for this position is based on the demonstrated ability of the person to successfully fulfill the requirements listed. C++ competency required.</li></ul> To perform the job successfully, an individual should demonstrate the following competencies: <ul> <li>Accountability - Shows up to work as scheduled, and follows instructions, policies, and procedures. Meets productivity standards, deadlines, and work schedules. Accepts full responsibility for quality of work, both independent and team projects</li> <li>Adaptability- Quickly modifies behavior to maintain effectiveness when experiencing major changes in work tasks or work environment. Approaches change as opportunities for learning and development.</li> <li>Results Oriented - Focuses on results and desired outcomes and how best to achieve them by ensuring that they and others stay focused on the objective and perform in accordance with clear expectations.</li> <li>Teamwork - Cooperates and collaborates with all teammates to achieve common goals by sharing information or expertise; working together to solve problems in a positive manner while valuing the contributions of others.</li></ul> Minimum Experience <ul> <li>C++/C/C# programming</li> <li>Familiarity with virtual/augmented/mixed reality projects or technologies</li> <li>Some game or graphics programming: Unreal, Unity, OpenGL, Direct3D, GLSL</li> <li>Algorithm development and object-oriented design</li> <li>Strong geometry and mathematics capability</li> <li>Virtual/augmented/mixed reality application development</li> <li>Experience with OpenVR, OpenXR, or other VR SDKs</li> <li>Desktop aviation simulation: X-Plane, Prepar3D, MSFS 2020</li> <li>UI design and implementation in various technologies</li> <li>3D modeling and animation</li> <li>Camera systems</li> <li>Electronic flight information system (avionics) development</li> <li>Design patterns and/or multi-threading</li> <li>Reading and using technical specifications</li> <li>Lean/Agile software development</li></ul> Knowledge, Skills, Abilities <ul> <li>SOFTWARE KNOWLEDGE AND SKILLS: Basic high level programming skills required. C, C++, FORTRAN, and/or Ada specifically are a plus. Knowledge of operating systems such as UNIX, Linux, and Concurrent OS/32 are a plus. Familiarity with Visual Studio 2015+, Team Foundation Server (Azure DevOps), and Project Server also a plus. EQUIPMENT KNOWLEDGE AND SKILLS: Microsoft Operating System and standard office equipment such as computers, phones, photocopiers and fax machines. LANGUAGE SKILLS: Fluency in English, through both verbal and written communications; Able to read, analyze, and interpret general business documents, technical procedures, or governmental regulations; Able to write reports, business correspondence, and procedure manuals; Able to effectively present information and respond to questions from groups of managers, clients and customers. MATHEMATICAL SKILLS: Able to work with mathematical concepts such as exponents, vector analysis, matrix transformations, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry; Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Able to define problems, collect data, establish facts, and draw valid conclusions; Able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.</li></ul> Physical Demands and Work Environment While performing the duties of this Job, the employee is regularly required to sit. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. The noise level in the work environment is usually moderate. FlightSafety is an Equal Opportunity Employer/Vet/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

About FlightSafety International FlightSafety International is the world's premier professional aviation training company and supplier of flight simulators, visual systems and displays to commercial, government and military organizations. The company provides training for pilots, technicians and other aviation professionals from 167 countries and independent territories. FlightSafety operates the world's largest fleet of advanced full-flight simulators and award-winning maintenance training at Learning Centers and training locations in the United States, Canada, France and the United Kingdom. Purpose of Position Evaluates, selects, and applies appropriate engineering techniques and procedures using judgment in making required adaptations and modifications to affect an accurate operating system. Fully autonomous in performing most assignments. Receives assistance only on unusual problems. Tasks and Responsibilities <ul> <li>Designs, creates, and modifies and maintains applications, development frameworks, and systems level software. Creation of some new applications.</li> <li>Modifies and writes device drivers for interfacing with hardware.</li> <li>Creates and modifies real-time executive and control software.</li> <li>Designs, modifies, and creates mathematical support library, systems utilities, and debug packages under the direction of a more senior engineer.</li> <li>Evaluates hardware and software to be installed on FSI-SS computer systems. Provides reports and recommendations.</li> <li>Provides support to team leaders and project engineers in software requirements, design, and implementation.</li> <li>Provides guidance to less senior engineers in the department. Provides recommendations for improvements.</li> <li>Documents operating system, application and development software.</li> <li>Works with fellow software engineers, hardware engineers and management to affect a smoothly integrated system.</li> <li>Performs application design from research to testing phase with limited supervision.</li></ul> Minimum Education <ul> <li>Bachelor's degree in Computer Science or other applicable technical field; and two years related experience; or equivalent combination of education and experience. C++ competency desired.</li></ul> Knowledge, Skills, Abilities SOFTWARE KNOWLEDGE AND SKILLS: Strong knowledge in Modern C++, or Strong C++, Windows/Unix, OS, C#, FORTRAN, Direct X, OpenGL, Dev Studio, Team Foundation Server, device drivers, and real-time computing. LANGUAGE SKILLS: Fluency in English, through both verbal and written communications; Able to read, analyze, and interpret general business documents, technical procedures, or governmental regulations; Able to write reports, business correspondence, and procedure manuals; Able to effectively present information and respond to questions from groups of managers, clients and customers. MATHEMATICAL SKILLS: Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry; Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Able to define problems, collect data, establish facts, and draw valid conclusions; Able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands and Work Environment The physical demands and work environment described here are representative of those that must be met and or encountered by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must occasionally lift and or move up to 10 pounds. Specific vision abilities required close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of the Job, the employee is occasionally exposed to moving mechanical parts and vibration. The noise level in the work is usually moderate. FlightSafety is an Equal Opportunity Employer/Vet/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

About FlightSafety International FlightSafety International is the world's premier professional aviation training company and supplier of flight simulators, visual systems and displays to commercial, government and military organizations. The company provides training for pilots, technicians and other aviation professionals from 167 countries and independent territories. FlightSafety operates the world's largest fleet of advanced full-flight simulators and award-winning maintenance training at Learning Centers and training locations in the United States, Canada, France and the United Kingdom. Purpose of Position Tasks and Responsibilities <ul> <li>Responsible for the administration and maintenance of various operating systems across multiple platforms.</li> <li>Responsible for setting up and maintaining the software file structure for each project.</li> <li>Responsible for configuration management of the simulator software including setting up and maintaining the source control systems and performing software builds, packaging, and installation.</li> <li>Supports the installation and implementation of device drivers for interfacing with hardware.</li> <li>Responsible for supporting mathematical support library, systems utilities and debug packages under the direction of a more senior engineer.</li> <li>Evaluates hardware and software to be installed on production and development computer systems under direction of a more senior engineer.</li> <li>Maintain consistency and quality of simulation software packages and its implementation on production and development computer systems.</li> <li>Support software developers and applications engineers in the programming and debugging of simulation software.</li> <li>Assist with documenting Policies and Procedures to be used by training center technicians and simulation software developers.</li> <li>Assist with documentation related to in-house and on-site software/hardware training classes which train employees and site technicians in up-to-date simulation environment, procedures, maintenance and trouble shooting.</li> <li>Works with fellow software engineers, hardware engineers and management to affect a smoothly integrated system.</li> <li>Reviews and utilizes the OS and simulation software logs to support and inform co-workers.</li> <li>Travel, shift work, and special work hours may be required to accomplish some of the above tasks.</li></ul> Tasks and Responsibilities <ul> <li>Exhibit and practice professional and courteous behavior while interacting with both internal and external customers.</li> <li>Interact within a cooperative environment through beneficial behavior, commitment to common goals, contribution to problem solving, communication of ideas and suggestions, and encouragement to other employees and departments.</li> <li>Accountable for the control and distribution of documents and/or equipment subject to export control restrictions and the security of FSI materials, projects and business information regarding the methods and techniques used in the production and usage of FSI products.</li> <li>Accountable for the accuracy and completeness of assigned tasks.</li> <li>Able to adhere to a work schedule including prompt and regular attendance.</li> <li>Ability to work in a constant state of alertness and safe manner.</li></ul> To perform the job successfully, an individual should demonstrate the following competencies: <ul> <li>Accountability - Shows up to work as scheduled, and follows instructions, policies, and procedures. Meets productivity standards, deadlines, and work schedules. Accepts full responsibility for quality of work, both independent and team projects.</li> <li>Adaptability- Quickly modifies behavior to maintain effectiveness when experiencing major changes in work tasks or work environment. Approaches change as opportunities for learning and development.</li> <li>Results Oriented - Focuses on results and desired outcomes and how best to achieve them by ensuring that they and others stay focused on the objective and perform in accordance with clear expectations.</li> <li>Teamwork - Cooperates and collaborates with all teammates to achieve common goals by sharing information or expertise; working together to solve problems in a positive manner while valuing the contributions of others.</li></ul> Knowledge, Skills, Abilities SOFTWARE KNOWLEDGE AND SKILLS: Demonstrated experience in the following: <ul> <li>Fortran 90, C and C++; and/or Unix highly desired</li> <li>Workstation and Server Operating Systems</li> <li>Scripting Languages; MS Dev Studio; MS Visual Source Safe and Team Foundation Services</li> <li>MS Office, including Power Point and Access Emacs and VI a plus</li></ul> EQUIPMENT KNOWLEDGE AND SKILLS: PC hardware, servers, networking hardware and standard office equipment such as computers, phones, photocopiers and fax machines. Knowledge, Skills, Abilities LANGUAGE SKILLS: Fluent technical English through both verbal and written communications is a must. Able to effectively present information, pose and respond to questions from subject matter experts including technical, pilot, engineering, managerial, clients and customers. The occasional need to effectively present information in one-on-one or small group presentations is required. MATHEMATICAL SKILLS: Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry; Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists; Able to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES OR REGISTRATIONS: <ul> <li>Valid Driver's License, where applicable. Must possess a valid Passport or be able to obtain a valid Passport at company expense.</li> <li>Ability and willingness to travel at least 75-80%</li></ul> Physical Demands and Work Environment While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk; climb or balance. Must work with keyboard, mouse, and monitor for long periods of time. The employee must occasionally lift and/or move up to 30 pounds. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places and fumes or airborne particles. The noise level in the work environment is usually moderate. FlightSafety is an Equal Opportunity Employer/Vet/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. FlightSafety is an Equal Opportunity Employer/Vet/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

Software Engineer Jobs in Broken Arrow, OK

Software Engineer Product Support
May 18, 2024

Software Engineer Iii
May 16, 2024

Software Engineer Iii
May 13, 2024

Software Engineer Ii
May 8, 2024

Software Engineer Product Support
May 8, 2024

Entry Junior Level Software Engineer
May 6, 2024

Quick filters

Top companies

Software Engineer Jobs in Broken Arrow, OK

Software Engineer Product SupportMay 18, 2024

Software Engineer IiiMay 16, 2024

Software Engineer IiiMay 13, 2024

Software Engineer IiMay 8, 2024

Software Engineer Product SupportMay 8, 2024

Entry Junior Level Software EngineerMay 6, 2024